•No insoluble residues
•Highly effective germicide.
•Highly stable source of active Chlorine
•Combination detergent/sanitiser
•Assists in the prevention of hard water scale build up
•Safe on all metals
Fome Chlor should be used through either a low volume or high volume foaming unit. Typically the concentration produced through the foaming unit will be between 25 -50 gm / litre. The foam should then be rinsed off with high pressure potable water. Fome Chlor can also be employed in manual applications at concentrations similar to above. Fome Chlor can be used with either hot or cold water
Classification of the substance or mixture This material is hazardous according to health criteria of Safe Work Australia.
GHS classification(s) Skin corrosion/irritation: Category 1B Aquatic Toxicity (Acute): Category 1
Label elements Signal Word DANGER
H314 Causes severe skin burns and eye damage. AUH031 Contact with acids liberates toxic gas Prevention statement(s) P260 Do not breathe dust/fume/gas/mist/vapours/spray. P264 Wash thoroughly after handling. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response statement(s) P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 P321 P363 P391 Immediately call a POISON CENTER or doctor/physician. Specific treatment is advised - see first aid instructions. Wash contaminated clothing before reuse. Collect spillage. Storage statements (s) P405 Store locked up
