•Highly concentrated to ensure economical use rates.
•Low foaming hot or cold.
•Completely neutral - safe on all surfaces.
•Phosphate Free formulation
•Fully biodegradable
•Product registered under Accord's “Recognised - Environmental Credentials Scheme”
•AUTOSCRUBBERS - Dilute 1 part to 120-150 parts water (1/2 litre per 60 litre autoscrubber tank) or 2-3 cups.
•GENERAL CLEANING - Dilute 1 part to 100-150 parts of water (1/3 -1/2 cup per 10 litres water). 1. Apply through a hand held spray-on applicator, 2. Apply to surface and allow appropriate contact time. 3. Rinse clean and allow to air dry
•SPRAY AND WIPE - Dilute 1 part to 100 parts water. 1. Spray on to surface to be cleaned and wipe over with a lint free cloth or paper towel. 2. Allow surfaces to air dry.
Signal Word
Warning
Hazard Classifications
Skin Corrosion/Irritation - Category 2 Serious Eye Damage/Irritation - Category 2A Sensitisation - Skin - Category 1B
Hazard Statements H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. Prevention Precautionary Statements P102 Keep out of reach of children. P103 Read label before use. P261 Avoid breathing dust, fume, gas, mist, vapours or spray.. P264 Wash hands, face and all exposed skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective clothing, gloves, eye/face protection and suitable respirator. Response Precautionary Statements P101 If medical advice is needed, have product container or label at hand. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P362 Take off contaminated clothing and wash before reuse. P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
