•Spontaneous emulsification of oily soils
•Rapid soil penetration and dislodgement
•Safe on most carpet fibres
•Safe on most stain resistant carpets
•Built in odour neutraliser
•Excellent detergency on natural & synthetic fibres
1. Vacuum area thoroughly to remove dry soil.
2. Dilute Carpet Plus 25mL/L for normal soiling and 50mL/L
for heavily soiled conditions.
3. Always pre-test the detergent on the carpet in a small
inconspicuous area before using. This is to determine if the
product is going to have any adverse effects on the carpet.
4. Spray diluted Carpet Plus over the carpet with an atomising
spray and allow to dwell for 15-20 minutes.
5. Agitate the carpet with a pile brush or other suitable
equipment if necessary.
6. Stains or heavily soiled areas may be treated using Carpet
Plus at 200mL/L dilution. Apply to stain. Gently agitate
working from the edge of the stain towards the centre.
7. Extract the carpet with clean water and allow to dry. Fans or
other ventilation can be used to reduce drying times.
DILUTION:
PRESPRAY:
Normal conditions: Dilute 25mL/Litre of water
Heavily soiled conditions: Dilute 50mL/Litre of water
PRESPOTTER:
Dilute 200mL/Litre of water.
DETERGENT:
Normal conditions: Dilute 5mL/Litre of water
Heavily soiled conditions: Dilute 10mL/Litre of water
DISPOSAL: Dispose of recovered waste water only through an
approved filter system. Help protect our waterways.
Signal Word
WARNING
Eye Damage (Category 2) Skin Irritation (Category 2)
